FL-Wapp Flow
FL-Wapp Flow
For use witch pumpable media
Usage and applications
Microwave sensor for moisture and water content measurement of pumpable media.
Reliable measurement of fluids and viscous materials as shotcrete and sprayed mortars, refractory products, suspensions or all kind of sludges.
Special Features
- easy installation in all common pipelines
- especially suitable for installation in pipes or screw conveyor / mixers with small diameters
- wireless parametering / calibration via user-independent terminal devices (WLAN capability)
- reliable microwave measuring principle
- additional temperature measurement
Technical Data
| Measuring method | Microwave / 433 MHz |
| Power Supply | 12 – 24V DC |
| Output (analog) | Moisture: 0-20 mA or 4-20 mA / Temperature: 4-20mA |
| Input (digital) | Start Measurement 12-24V |
| Measuring range | 0-15,0 % or 0-XX,X % (depending on material) / 0-80° C (176°F) |
| Temperature operating Range | Up to 70°C (158°F) |
| Accuracy | depending on measure range and material (approx. ± 0,3 %) |
| Power Consumption | 1,5 Watt, max. 2 Watt |
| Parameterization / Measured values | via wireless WiFi interface with software or android app |
| Cable Connection | 5 x 0,25 mm² shielded (foil shield) L: 2 m. with miniature round connector, 5-pole-plug |
| Dimensions Sensor (stainless steel) | Sensor: L: 100mm, W: 20mm, H: 25mm / Base plate: L: 140mm, W 30mm / IP67 Measuring surface: aluminium oxide ceramic |
| Measurement tube | Stainless steel / Ø: 1,5” rsp. 2” (further pipe diameter upon request) |
| Weight | 1,5kg |